SPECIFICATIONS - 60" x 12 oz.
· Roll Width - 60"
· Roll Size - 50 Yds.
· Weight - 12.2 oz. per sq. yd.
· Construction - Solid Vinyl on both sides with a polyester Woven Scrim Insert
· Fabric Yield - 8.0 Yds. /Lb.
· Tensile Strength - Fed. Std. 191-5100 - Warp 118 1 lbs. Weft 103 lbs.
· Tear Strength - Fed. Std. 191-5136 - Warp 31 lbs. Weft 30 lbs.
· Accelerated Light Aging (Weather-o-Meter) - ASTM G23-81 No appreciable color fading or development of touch after 1000 hours exposure
· Flexing Resistance (Newark) - CS 273-65 No cracking or delamination of vinyl after 20,000 cycles
· Mildew Resistance (Soil Burial) - Fed. Std. 191-5100-5762 - No reduction below 75% of original strength

SPECIFICATIONS - 60" x 18 oz.
· Roll Width - 60"
· Roll Size - 50 Yds.
· Weight - 18 oz. per sq. yd.
· Construction - Solid Vinyl on both sides with a nylon Woven Scrim Insert
· Tensile Strength (Warp x Fill) - Fed. Std. 191-5100 (Grab) - 272 x 272 lbs.
· Tear Strength (Warp x Fill) - Fed. Std. 191-5134 (Tongue) - 75 x 75 lbs.
· Adhesion (Peel) (Warp x Fill) - Fed. Std. 191-5970 - 25 x 25 lbs./2"
· Cold Crack - Fed. Std. 191-5874 - -580 F
· Hydrostatic Resistance - 385 psi
· Accelerated Light Aging (Weather-o-Meter) - ASTM G23-81 No appreciable color fading or development of touch after 500 hours exposure
· Flexing Resistance (Newark) - CS 273-65 No cracking or delamination of vinyl after 20,000 cycles
· Mildew Resistance (Soil Burial) - Fed. Std. 191-5100-5762 - No reduction below 75% of original strength

MEETS THE FOLLOWING FLAMMABILITY CODES*
· MVSS 302

*This term and any corresponding data refer to typical performance in the specific tests indicated and should not be construed to imply the behavior of this or any other material under actual fire conditions.

* *This information Is offered for your general guidance only. It is accurate to the best of our knowledge at time of printing, but is not intended to relieve the user from its responsibility to investigate and understand other pertinent sources of information and to comply with all laws and procedures applicable to the safe handling and use of this material.