Specifications:

WIDTH: Fed. Std. 191-5020 54" m in.
WEIGHT. Fed. Std. 191-5041 28. 0 ozs. / I i n. yd. +/- 5 %
THICKNESS: CS-273 - 43 mils. +/- 10%
TENSILE STRENGTH: Fed. Std. 191-5100 Warp 80 lbs. min. Fill 67 lbs. min.
TEARING STRENGTH (TRAPEZOID): Fed. Std. 191-5136 Warp 20 lbs. min. Fill 20 lbs. min.
ADHESION OF COATING: CS-273-65 2.5 lbs./inch min.
ELONGATION PROPERTIES: CCC-A-680A Warp 15% min. Fill 50% min.
ABRASION RESISTANCE (WYZENBEEK): Fed. Std. 191-5304 (using 220 grit) - No wear through to foam layer after 500 double rubs.
ACCELERATED LIGHT AGING (WEATHER-O-METER): ASTM G23-81 - No appreciable colour fading or development of tack or stiffness after 1000 hours.
COLD RESISTANCE: Fed. Std. 191-5874 - PASS, -20 (Degrees F)
FLEXING RESISTANCE (NEWARK): CS-273-65- No cracking or delamination of the vinyl from the base fabric after 20,000 cycles.
BLOCKING RESISTANCE: Fed. Std. 191-5872 - Scale rating of 2 max.
CROCKING RESISTANCE: Fed. Std. 191-5651 - Rating of good in both wet and dry tests.
MILDEW RESISTANCE (SOIL BURIAL): Fed. Std. 191-5100 + 5762 - Pass, No reduction below 75% of original strength.
OIL RESISTANCE: CCC-A-680A - Pass, No permeation of oil.
FUNGAL GROWTH RESISTANCE: ASTM G21-75 - Pass, No fungal growth.
MANUFACTURED TO MEET FLAMMABILITY* REQUIREMENTS CONTAINED IN THESE SPECIFICATIONS.
FIRE RETARDANCY. California Bulletin 117 - Pass; UFAC - Class 1, BIFMA - Class I

*Terms and corresponding data refer to performance in the specific test indicated and should not be construed to imply the behavior of this or any material under actual conditions. This information is accurate to the best of our knowledge at the time of printing, but is not intended to relieve the user from its responsibility to comply with all procedures applicable to the safe use of this product.