Specifications:

Ambassador, the choice of Contract Inferior Designers for color and quality, introduces a revolutionary clear seal: "Defense". This surface seal is manufactured with environmentally friendly materials.

Morbern USA's new "Defense" Surface Seal:
· Shields out difficult stains.
· Protects against scuffs and scrapes.
· Blocks out normal dirt and grime.
· Extends the "new vinyl" look and Fabric Life, thus, lowering maintenance and repeat upholstery costs.
· Eases daily cleaning. Most cleaning is just wipe and clean.
· Improves abrasion resistance ten times that of many conventional vinyl fabrics.
· Anti-Bacterial/Anti-Microbial Treatments.

Defense Care and Cleaning Instructions
Defense surface seal has been designed so that difficult stains can be cleaned without having to use strong active solvents such as nail polish remover or diluted solutions of acetone and water.
Follow the ensuing instructions carefully for the best long term results. It is recommended that each stain is cleaned in a stepwise manner using the sequence below:
Step 1: Regular cleaning. Dirt and grime. Use mild soap and water, then fresh water rinse, Cleaning frequency depends on use, as a minimum, please clean weekly

Step 2: Stubborn stains. Crayon, Eye shadow, Chocolate, Blood. Wipe using a soft cloth or a soft brush. Use detergent cleaners such as Formula 409 or Fantastic. Rinse with clean water and wipe dry

**Step 3: More difficult stains, Ballpoint Pen, Lipstick, Mustard, tar or asphalt. Clean the stained area with lighter fluid or rubbing alcohol. Carefully rinse with clean water and dry.

Note: For best results, immediate attention is required for severe stains.
**Caution - Exercise care as these solvents are flammable, Use only small quantities of solvents and keep clear of any sources of ignition, Wear protective gloves and ensure cleaning takes place in a well ventilated area.

MORBERN "AMBASSADOR" SPECIFICATIONS:
· Nominal total thickness: .045 ± .005
· Anti-static finish
· Nominal skin thickness: .008 gouge
· Oil resistant
· Standard weight: 34 - 2 a Width: 5411
· Flame resistant
· Roll length: 40 yards
· Mildew resistant backing and face

MANUFACTURED TO MEET FLAMMABILITY* REQUIREMENTS CONTAINED IN THESE SPECIFICATIONS
· Boston Fire Department Test (Section 11.07 Fire Code 1959) _ NFPA 701 Small Scale Test
· California State Fire Marshall Test (Par. 1273.3 Fire Code Title 19) _ a. Ohio & Cincinnati Bldg. Code
· New York Port Authority _ FMVSS 302
· CID-A-A-2950-A 0 California Flammability Regulation 117-75 Section E
· Federal Spec. CCC-A-700E 0 Meets physical strength requirements
· FAA, FAR 25,863 of Canadian Government Spec. CAN/CGSB-4.125-M90

*THIS TERM AND ANY CORRESPONDING DATA REFER TO TYPICAL PERFORMANCE IN THE SPECIFIC TEST INDICATED AND SHOULD NOT BE CONSTRUED TO IMPLY THE BEHAVIOR OF THIS OR ANY OTHER MATERIAL UNDER ACTUAL FIRE CONDITIONS.